1. <tbody id="7luvp"><nobr id="7luvp"></nobr></tbody>
      <menuitem id="7luvp"></menuitem>
    2. <progress id="7luvp"></progress>
      <progress id="7luvp"><bdo id="7luvp"></bdo></progress>
        <samp id="7luvp"></samp>
      1. <progress id="7luvp"></progress>

          1. Injection Molding of Thermoplastics

            Injection Molding of Thermoplastics

            Summary:  Thermoplastic injection molding is a process in which plastic material is melted and injected into...

              Thermoplastic injection molding is a process in which plastic material is melted and injected into a mold cavity.

              The melted plastic enters the mold, and it is cooled to form a certain shape according to the mold cavity. The resulting shape is often the final product and requires no further processing before installation or use as a final product. Many details, such as bosses, ribs, and threads, can be formed in a single injection molding operation.

              An injection molding machine has two basic components: the injection unit for melting and feeding the plastic into the mold, and the clamping unit. The function of the mold clamping device is 1. Make the mold close under the injection pressure; 2. Take the product out of the injection device to melt the plastic before injecting it into the mold, and then control the pressure and speed to inject the melt into the mold.

              Two designs of injection units are currently used: screw pre plasticizers or two-stage units, and reciprocating screws. Screw pre-plasticizers use a pre-plasticizing screw (first stage) to inject molten plastic into the injection rod (second stage).

              The advantages of screw pre-plasticizers are the constant quality of molten mass, high pressure and high speed, and precise injection volume control (using mechanical thrust devices at both ends of the piston stroke). These advantages are required for transparent, thin-walled products and high production rates. Disadvantages include non-uniform residence time (leading to material degradation), higher equipment costs, and maintenance costs. The most commonly used reciprocating screw injection device does not need a plug to melt and inject the plastic.

          2. 23 Jun

            What factors should be considered when choosing an injection molding machine?

            When choosing an injection molding machine, several factors should be considered to ensure it meets the specif...

          3. 15 Jun

            What are the factors to consider when selecting an injection molding machine for your production needs?

            When selecting an injection molding machine for your production needs, several factors should be considered to...

          4. 07 Jun

            Efficiency and Performance Optimization of Strong Crushers Machines

            Efficiency and performance optimization are crucial aspects when it comes to Strong Crusher Manufacturers. Max...

          5. 黄色视频在线观看免费